Specifications

INPut
The INPut subsystem controls configuration of programmable input Signal
Conditioning Plug-Ons (SCPs).
Subsystem Syntax INPut
:DEBounce
:TIME <time>,(@<ch_list>)
:FILTer
[:LPASs]
:FREQuency <cutoff_freq>,(@<ch_list>)
:FREQuency? (@<channel>)
[:STATe] 1|0|ON|OFF,(@<channel>)
[:STATe]? (@<channel>)
:GAIN <chan_gain>,(@<ch_list>)
:GAIN? (@<channel>)
:LOW <wvolt_type>,(@<ch_list>)
:LOW? (@<channel>)
:POLarity NORMal | INVerted,(@<ch_list>)
:POLarity? (@<channel>)
:THReshold
LEVel? (@<channel>)
INPut:DEBounce:TIME
INPut:DEBounce:TIME <time>,(@<ch_list>) sets the debounce time on the
specified digital input channels.
Parameters
Parameter
Name
Parameter
Type
Range of
Values
Default
Units
time numeric (float32)
(string)
see comment |
MIN | MAX
Hz
ch_list channel list (string) 132 - 163 none
Comments
·
For a description of the debounce function see “Debounce Function” in the
VT1536A SCP manual. The VT1536A has two debounce timers. One for the
lower four channels and one for the upper four channels. To set the debounce
timers use the command:
INPut:DEBounce:TIME <time>,(@<ch_list>)
Chapter 6 233
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com