Specifications

sanity check readings. The actual output will be precisely what was
programmed if the VT1419A has been calibrated and an analog output
can be connected to one of the analog input channels to see exactly
what values are being set. When returning to a previously selected
output channel, the Analog Output slider will adjust itself to the last
programmed value used when the other channel was selected.
H. These two sections provide some added flexibility. Under the Analog
Output section, two buttons called STORE and RECALL can be seen.
Once the values of all the analog outputs have been programmed,
press the STORE button to save the output states. If RESET is pressed
or the program is restarted later, press RECALL to restore all those
programmed values.
The LOG ON/OFF buttons permit the measurement results to be logged from the
first 32 analog input channels to a file named “aichans”. Each time this
Agilent VEE example is “RUN,” this file is cleared. Successive ON/OFF selections
while START is active will append data to the file. To view this data later, run the
Agilent VEE program dlgr1419.vee and specify the filename “aichans” as the Input
Data File.
VEE Programming Examples
Virtual Front Panel Program
146 Chapter 5
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com