Specifications

Wiring Connections and File Locations for the Examples
The following illustration shows the connections that should be made to the
VT1419A to allow the example programs in this chapter to operate as described.
For detailed information on connecting wiring to the VT1419A, see Chapter 2.
Example File
Location
The supplied VXIplug&play Drivers & Product Manuals CD (P/N: 72-0030-000)
contains all of these example programs stored in the Agilent VEE 3.0 compatibility
mode. If using Agilent VEE 4.0 or higher, it may be beneficial to compile those
examples that would benefit from the increased speed (panl1419.vee, temp1419.vee
and swap1419.vee).
The Directory path to these examples is:
<cd drive letter>:\Misc Product Info\Program Examples\VT1419
Installing Example
Files
In order for the example programs to run they must be installed onto the hard drive
in the C:\dabundle directory. The Misc Product Info\Program
Examples\VT1419 directory mentioned above contains a batch file “install.bat”
that will copy the examples to C:\dabundle. Using Windows system’s File
Manager or Explorer, open the CD directory Misc Product Info\Program
Examples\VT1419\vee_files and double-click on “install.bat.” Agilent VEE can
then be started and the example programs loaded.
VEE Programming Examples
Wiring Connections and File Locations for the Examples
Chapter 5 143
VT1533A
Digital I/O
Voltage Input Ch 0
VT1531A
Voltage DAC
Voltage Input Ch 1
Voltage Input Ch 2
TC Temp Input Ch 3
Ref Temp Input Ch 7
Reference
Thermistor
type T
thermocouple
(on terminal
module)
Ch 32 Voltage Output
Digital Channels
SCP Pos 0
SCP Pos 7
SCP Pos 1
SCP Pos 6
SCP Pos 2
SCP Pos 5
SCP Pos 3
SCP Pos 4
empty empty
Figure 5-1: Signal Connections for Examples
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com