User's Manual

Command Groups
3–18
VX1410A & VX1420A IntelliFrame Mainframe Instruction Manual
Table 3–9: System commands (Cont.)
Header Description

& Returns the syntax of the specified command.
"" Sends interface event messages between the VXI interface
and the RS-232 port.
 Returns the model number of the mainframe.
 Recalls device settings from nonvolatile RAM.
$ Saves device settings to nonvolatile RAM.
 " Returns the options installed in the mainframe.
% !

1
Disables the CALibrate command.

1
Enables the CALibrate command.

1
Queries if password-protected commands are enabled.
! Powers the mainframe on or off. The query returns whether
the power is on or off.
 Queries the number of times the mainframe power has been
cycled.
 Queries the power source of the enhanced monitor.
"# Sets or queries whether the VXI SYSRESET signal can
reset the enhanced monitor.
# Initiates a VXI SYSRESET signal.
 Sets or queries the time.
# Returns the number of hours the mainframe has been
operating since the last factory maintenance.
 Returns the number of hours the mainframe has been
operating since power on.
  Returns the SCPI version supported by the IntelliFrame
Mainframe.
1
These commands are intend to be used only by qualified service personnel while
servicing the instrument.