User`s manual

The nose bridge is designed to be adjusted to your personal needs – not to be readjusted repeatedly for
multiple users. Sharp angles and excessive bending can result in metal fatigue and premature failure of
the nose bridge stems.
The nose bridge is designed to be adjusted to your personal needs – not to be readjusted repeatedly for
multiple users. Sharp angles and excessive bending can result in metal fatigue and premature failure of
the nose bridge stems.
AccuTilt
®
Viewer Adjustment AccuTilt
®
Viewer Adjustment
AccuTilt viewer adjustment is a Vuzix technology that allows you to adjust the angle of
the display housing 15 degrees to ensure optimum alignment.
AccuTilt viewer adjustment is a Vuzix technology that allows you to adjust the angle of
the display housing 15 degrees to ensure optimum alignment.
Grasp the iWear viewer’s front display on both either side and
tilt it up or down to
aligned the displays.
Grasp the iWear viewer’s front display on both either side and
tilt it up or down to
aligned the displays.
Tether Strap Tether Strap
Your VR920 eyewear package contains a tether or retainer strap to help secure the iWear. Your VR920 eyewear package contains a tether or retainer strap to help secure the iWear.
Slide its rubber ends around the stem of your eyewear and tighten the sliding collar. While wearing your
eyewear, fit the tether over your head and move the adjustment retainer to provide a comfortable and
stable fit.
Care & Maintenance
Your eyewear is designed to provide trouble free, low-maintenance use.
Cleaning
Abrasive cleaners such as glass cleaner, paper towels and facial tissues can scratch the coating on your
iWear lens. To clean the lens, fog it with your breath and use the provided microfiber pouch. If you
choose to use a liquid cleaner, only use solutions designed for optical lens and apply the cleaner to a
microfiber cleaning cloth, not directly onto the iWear. Spraying cleaners directly onto the iWear may result
in permanent damage, not cover by the warranty.
Powering Down Your Eyewear
The iWear VR920 video eyewear does not have an on/off switch and leaving it powered up will not harm
it. If you feel more comfortable powering it down when it’s not in use, simple unplug its USB connector.
Technical Support
If you encounter a technical problem with your eyewear please check the Vuzix VR920 Forum
for a
solution and/or our VR920 Frequently Asked Questions
(FAQs). If you are still unable to resolve your
difficulty, you can also contact our technical support staff through the Support / Contact page
of our web
site.
Vuzix iWear VR920 User’s Manual Page 16