Manualshelf

User`s manual

ManualsBrandsVuzix ManualsComputer equipmentiWear M920
9101112131415161718
than 3 seconds brings up the OSD along the bottom of the iWear displays.
Note: The OSD automatically closes if the OSD Control is unused for more than 5 seconds.
When the On Screen Display (OSD) is shown, the OSD Control wheel is used to access and select OSD
menu items. Pressing the wheel accesses menu and sub-menu options and adjustments or executes
menu commands.
Brightness
Contrast
Display
Modes
Brightness
Balance
Backlight
Adjustment
Default Reset
Exit OSD
When the Brightness menu is selected and the OSD Control wheel is pressed, an
adjustment indicator bar is displayed. Use the OSD Control wheel to adjust the
display brightness and press the wheel again to exit the brightness control.
Selecting the Contrast menu works the same as Brightness; press the OSC Control
wheel to select it, turn the wheel to adjust contrast, and then press the wheel again
to exit the Contrast adjustment.
When viewing 2D applications, the Display Mode should be set to 2D monoscopic
video; the sub-menu icon furthest to the left.
When using 3D stereoscopic applications choose one of the 2D stereoscopic
display modes. Most applications use the Left eye setting, indicated by the icon
with the “L”. If its 3D imagery does not appear correct, select the Right eye setting.
Some people find that one display appears darker or lighter than the other due to
differences in InterPupilary Distance (IPD). The Brightness Balance function allows
you to compensate for this. Access the function and rotate the wheel to adjust
brightness between the two displays until both appear equally bright.
This menu items allows you to adjust the amount of backlighting in the display. An
increased amount of backlighting helps in bright conditions while lower backlighting
provides superior quality in low light conditions.
This command resets all of the OSD menus to their original values.
Press this menu item to exit the OSD or simply don’t use the OSD Control wheel
for 5 second and the OSD will automatically be closed.
Vuzix iWear VR920 User’s Manual
Page 14