User manual

iWear VR920 Hardware
On Screen Display (OSD)
The VR920 contains an On Sc reen
Display (O SD) for ad justing volume
and display options. It is accessed and
cont r olled t hr ough an O SD Contr ol
loc ated und er the right cor ner of the
eyewear’s display.
This is a multi-function c ontr ol that c an
be pressed like a button or turned like
a dial.
• When no on-screen display is
shown in the eyewear , t urning
the OSD Control adjusts the
volume.
• Press the OSD Control to access and display the OSD.
• With the OSD displayed, press the OSD Control to make selections
and rotate its dial to makes adjustments of change selections.
•
After adjusting a control setting, press the OSD Control again to exit
that control.
Note: The OSD automatically closes if the OSD Control is unused for more
t han 5 seconds.
OSD Menu Options
Brightn ess: When the Brightness menu is selected and
the OSD Control wheel is pressed, an adjustment
indicator bar is displayed. Use the OSD Control wheel
to ad just t he d isplay b rightness and p ress the wheel
again to exit t he brightness c ontr ol.
Contrast: Selecting the Cont r ast menu works the same
as Brightness; press the OSC Control wheel to select it,
turn the wheel to adjust cont rast, and then p ress the
wheel again to exit the Contrast adjustment.