User manual

The Set Zero button establishes the eyewear/tracker’s home or centered
position. As you move your head you will see the indicators and values in
the Yaw, Pitch and Roll ind icators change to reflect the tracker’s current
positioning.
Drift
Some degree of drift in the Yaw axis is normal. You can use the Set Zero
button to re-
center the tracker from time to time, without going through
the complete c alibration process.
Monitor
Stereoscopic 3D video and head tracking require support within each
application. This may be incorporated
through Native support written
directly into the ap plic ation or t hr ough a Vuzix Extension.
Vuzix Extensions are managed thr ough the Monitor section of the VR
Manager. The Titles list shows all programs for which Vuzix Extensions are
currently available, as well as their status.
Note: Software titles incorporating Native 3D video and/or head tracking
support are not listed in the Monitor, as they do not require VR
Manager Extension support. Only titles requiring Extensions are
included in the Monitor listing.