User manual

Position your eyewear/tracker in a
position similar to where it will be used,
and move it fully through each of t he
yaw, pitch and roll axis.
Yaw and roll support a full 360º of
movem ent whereas pit ch is only 180º.
Continue moving the eyewear/tracker
through it full range on m ovement, on each axis, until the progress bars
stop progressing.
Note: The calibration progress bars will not fill completely – this is normal.
2. When the indicator bars stop moving, press the “Loc k
Calibration” button.
3. Position the eyewear/tracker in the position where it will be used,
facing your computer monitor or the desired ‘straight ahead’
position, and press the “Set Zero” button.