User's Manual
Operation
13Proprietary. Humaneyes Technologies
Firmware Upgrade
Camera Reset
Camera Factory Reset
See our support page for updates regarding Firmware www.vuze.camera/support.
You can upgrade your camera’s rmware manually, or through Vuze XR Mobile App.
To upgrade through the Vuze XR app:
When a rmware update is available you will see a red notication badge on the App Settings icon.
To upgrade the rmware navigate to Settings>Camera Settings> Upgrade Firmware and follow the on-
screen instructions.
To upgrade manually follow these steps:
1. Turn the camera o.
2. Download rmware from www.vuze.camera/support
3. Copy the rmwareVXR.bin le to the SD card root folder.
4. Insert the SD card into the camera’s micro SD slot and press it into place.
5. Turn the camera on.
6. The camera will boot normally.
7. The rmware upgrade starts when the Power/Mode LED start blinking pink.
8. When rmware upgrade is complete the camera will reboot and start up normally.
9. You can check your camera’s rmware version through the Vuze XR Camera App’s settings.
Note: Do not turn o the camera or remove the microSD card during rmware upgrade.
Press and hold the On/O button for 16 seconds while the camera is on. This can be used in a situation
where camera is not responding.
To reset the camera to factory defaults turn the camera on and press and hold capture button simultaneusly
with the On/O button for 8 seconds while the camera is on.