Operating instructions

Page 2
The VuQube VQ2000 and VQ3000 Automatic Satellite Systems provide simple, one-touch operation
for easy access to all your favorite satellite TV channels. They are full featured portable dish
systems with automatic satellite acquisition, satellite switching capabilities and for the VQ3000, in-
motion capabilities.
An optional Flex Install Kit with ladder mount bracket (KC# MB410 - sold separately) is available to
allow semi-permanent installation on the rear ladder of your RV, but still provides the flexibility to
remove the antenna for use as a portable (Fig. 1). The kit includes everything required to hard wire
your RV for the VuQube, including ladder mount bracket, power/controller cable, (2) coax cables,
(2) cable entry cover plates and controller (Fig. 2).
The VQ2000 and VQ3000 are compatible with the following satellite services:
DIRECTV Single Satellite
DIRECTV Plus
Dish Network Dish 500 and Dish HD Eastern Arc
Dish Network HDTV (Dish HD Western and Eastern Arc with Locals, Dish HD Alternate)
Bell TV satellites 82 and 91
The VQ2000 and VQ3000 include 3 main components (Fig. 3).
Antenna Unit Placed in direct line of sight to the southern sky. The dish is covered by
an enclosure for easy transport and protection from the elements.
Controller Activates the search mode and provides limited diagnostic functions
using the status light.
Power Supply Supplies proper operating voltage to the VuQube.
SECTION 1
PRODUCT OVERVIEW
Fig. 1
The VuQube can be placed anywhere there is a clear view of the southern sky.
The VuQube can be
semi-permanently
mounted to your RV
with the optional Flex
Install Kit
(sold separately).