Specifications

C
6
= Std. Carton Qty.
35
RV ELECTRONICS
& GAUGES
AERIAL MOUNT ANTENNAS
Upgrade to the latest antenna technology and
get maximum reception of the new digital TV signals.
The sleek, aerodynamic JACK® antenna is fixed at
11-1/4” high eliminating the need to crank up or
down and is always ready for travel. An amplified,
ultra high gain antenna provides the best digital TV
reception available for your RV with superior reception
of both VHF and UHF signals and a much broader recep-
tion range. The built-in SureLock® Digital TV Signal
Finder let’s you pinpoint the local TV towers before scan-
ning for channels for simple, fool-proof antenna pointing.
Full 360° rotation allows for precise antenna pointing with no “dead
spot” commonly found with other antenna mounts. An LED light on the
head confirms power to the built-in amplifier via the supplied wall mount
power injector switch. At just 11.25”H x 16”W x 12.5”L, the JACK® is
up to 70% smaller than other antennas and provides superior reception
of the new digital TV signals. Available in black or white.
87581
Jack Antenna, White #OA8200 1
87582 Jack Antenna, Black #OA8201 1
REPLACEMENT HEAD
FOR SENSAR
®
Sensar® is a registered trademark of Winegard® Company. Jack® is
a product of King Controls® and is not affiliated with nor manufactured
by Winegard® Company.
Replace your old Sensar® antenna with the JACK® replacement head
for better digital TV reception. Includes custom bracket for simple
retrofit to your current antenna mast using the existing mounting pins.
Broader reception range helps to receive signals
found in the “dead spot” or 35° of rotation not
reached by the existing mount. The amplified
antenna can be powered by your existing antenna
power supply or used with the included power
injector. A universal mounting bracket is also
included for installation on a pole or railing
for residential use. At just 2.25”H x 16”W x 12.5”D, the JACK®
replacement head is 70% smaller with improved wind resistance
and weighs 25% less than the existing antenna head.
87264
Replacement Head, White #OA-8000 10
87580 Replacement Head, Black #OA8001 10
ANTENNA POWER INJECTOR SWITCH
Twelve volt DC power supply for amplified antenna with
flush wall mount plate. Inputs for TV antenna and cable with
built-in selector switch. F-type connectors for 2 TV outputs.
87583
Power Supply, White #PB1000 1
87584 Power Supply, Black #PB1001 1
BUILT IN
SIGNAL
FINDER
87581, Crank
MOUNTING PLATE
Use when replacing existing antenna
to cover all pre-existing screw holes
for a simple water-tight seal.
87711
Mounting Plate
#MB8000
10
N
E
W
!
* More accessories
are presented
on page 50.
SURELOCK™ DIGITAL TV SIGNAL FINDER
Use the SureLock® to pinpoint the location of local TV towers before doing a channel
scan for simple, fool-proof antenna pointing. Greatly reduces set-up time and frustration
by eliminating the need for multiple channel scans in different directions. Simple plug-
n-play design connects to any available TV antenna output or may be installed inline
between the antenna and TV. Rotate the antenna until the maximum number of LED’s
are illuminated in the signal meter, then run a channel scan. Variable gain control feature
let’s you adjust sensitivity for optimal resolution in both strong and weak signal areas.
For use with any over-the-air TV antenna. 3”H x 3”W x 1”D.
87572
SureLock Signal Finder #SL1000 40
In Section C:
Satellite Antennas TV Antennas Antenna Accessories Phone Accessories TV Stereo CB Navigation
KING CONTROLS SATELLITE SYSTEMS