Specifications
C
6
= Std. Carton Qty.
45
RV ELECTRONICS
& GAUGES
DIGITAL TV ANTENNAS
Antennas For FREE Digital Programming: ABC, CBS, NBC, FOX, PBS, CW, plus more!
All Winegard Antennas made is USA.
SENSAR® III HDTV ANTENNA
Enjoy local programs in crisp, clear digital and HD FREE with the most popular and most reliable
over-the-air antenna in the RV industry! Built-in amplifier and unique circuitry provides clear VHF/UHF
reception whenever you park your RV. Raise, lower and rotate the antenna with hand crank from inside
your RV. It’s easy to install and lowers to only four inches above the roof while traveling. Antenna RV-3095
includes amplified antenna and lift assembly, +12 VDC white power supply with on/off switch, white interior
control parts, 20 feet of 75 ohm coax cable, 6 ft. TV set cord. Antenna RV-7095 includes amplified
antenna/lift, white control parts, no power supply or cable. Sensar® head U.S. Patent D500,496.
85412
Sensar III Antenna with Power Supply #RV-3095 1
85413 HD Sensar III Replacement head, amplified (RV-3095) #RV-2005 1
85415 Non-Amplified Sensar III Antenna #RV-5095 1
85414 Sensar III Antenna without Power Supply #RV-7095 1
80280 Leveling Mount (to replace a broken mount on old-style head) #RP-2000 6
Sensar® Antenna
Replacement Parts
SENSAR TV ANTENNA REPLACEMENT PARTS
87511 HD Sensar IV Integrated Replacement head,
amplified #RVW-205
1
85413 HD Sensar III Replacement head,
amplified #RV-2005
1
89496 Elevator Tube Assembly Kit. Includes: 2 elevator tubes
#2750900, 2 grommets #2200340, 4 pins #5160817,
4 retaining rings #5160817, 1 rubber bumper #2240022,
1 self-drilling screw (#2160120) #RP-2900
1
80280 Leveling Mount Assembly Kit for pre-1990 models.
Includes: 1 leveling mount #3200625, 4 spacers #3200626, 2 pins
#5160817, 4 retaining rings (#5160818) #RP-2000
6
80285 Elevating Gear (Replaces #2200046), Poly Bagged
#RP-3000
6
80293 Worm & Shaft Assembly #RP-4000 12
Spec.Ord. Extra Long Worm & Shaft Assy.: • #2750896, 12
1
/
4
"
with Directional Handle;
• #2764162, 14" without Directional Handle.
89495 Gear Housing Assembly Kit; Includes: 1 gear housing
#2200049, 2 pins #5160817, 1 bearing #3200656,
nuts #2200047, 1 bearing #3200657, 1 o-ring seal #5240603,
1 retaining ring (#5160817) #RP-2049
1
89497 Baseplate Boot Assembly Kit; Includes: 1 base plate
#3100523, 10 screws #2160178, 1 rubber boot #3200154
#RP-3523
1
89492 Directional Handle Assembly Kit, Ivory. Includes:
1 directional handle #3200621, 1 ceiling plate #3200608,
4 screws #5160812, 1 spring #2160822 1 decal #5413002
#RP-6200
4
89493 Directional Handle Assembly Kit, White. Includes
1 directional handle #3200612, 1 ceiling plate #3200609,
4 screws #5160812, 1 spring #2160822 1 decal #5413002
#RP-6300
4
85159 Handle Spring #RP-6822 12
85169 Nylon Bearing #RP-2658 12
89499 Elevating Crank Kit, White
Includes: 1 crank, 1 set screw (hex shaft) #RP-6795
12
80307 Elevating Crank with Set Screw, Ivory, Straight
(Angled handle no longer available) #RP-5000
12
ROADSTAR™
OMNIDIRECTIONAL HDTV ANTENNA
Omnidirectional, over-the-air HD antenna
continuously receives VHF/UHF/FM signals
from all directions, so you’ll never have to adjust
it. Built-in solid state amplifier boosts signals on
average of 15dB on VHF, 20 dB on UHF.
Power supply operates on 12 volt DC.
ROADSTAR RS-2000 SPECIFICATIONS
Height: antenna only: 2
3
/
16
inches;
Height: with mount: 8
3
/
16
inches;
Diameter: 21
1
/
2
inches;
Weight with mount & hardware: 5 pounds;
Bandpass: VHF/FM: 54-216 mHz;
................................ UHF: 470-810 mHz;
Amplifier gain: VHF: 15.5 dB avg.;
................................. UHF: 19.5 dB avg.;
Impedance: 75 ohm;
Power required: 12VDC at 85 ma.
83315 RoadStar HD Antenna
#RS-2000
1
82263 Antenna Tool #TT-1000* 6
WINEGARD
ANTENNA TOOL
Antenna tool features a long
shaft for tightening 15/16 gear
housing nut for Sensar and crank-
up RV satellite systems.
In Section C: Satellite Antennas TV Antennas Antenna Accessories Phone Accessories TV Stereo CB Navigation
WINEGARD ANTENNAS & ACCESSORIES