Owner`s manual

Page 16
Section 5 TROUBLESHOOTING
NOTE: If you cannot lock onto the correct satellite, it is most likely that an object is blocking the signal. If this is the
case, move the VuQube to have an unobstructed view of the southern sky.
ERROR CODES POSSIBLE REASON COURSE OF ACTION
EO Remote is unable to send
commands to antenna.
Batteries low in remote control.
Turn remote OFF, wait 5 seconds, and
turn back ON.
Make sure receiver is turned ON.
Make sure coax from antenna is
connected to receiver.
Move remote closer to antenna.
Change batteries in remote control.
E1 Remote is unable to receive
response from antenna.
Move remote closer to antenna.
E2 Miscommunication between remote
and antenna.
Call King Controls.