User manual

1
Power On/ Off: Press and hold this key for 3 seconds to turn power on or off.
In Power on mode:
1) When using the scanner without the docking station,
press this button to start
scanning, press this button again to stop;
2) When the scanner is on the docking station with PC connection, press this button
to switch between Standby mode and USB mode.
In Setup mode, press this button to confirm changes.
In Playback mode, press this button to change the zoom between normal, 4x, and
8x.
2
Press this button to enter Playback mode.
Press this button to return to the previous screen.
In Setup mode: Press this button to exit Setup mode.
3
Press this button to enter Setup mode.
In Playback mode: Press this button to enter the single file delete mode.
When zooming in under Playback mode: press this button to shift the functions of
and between UP/DOWN and LEFT/RIGHT.
4
LCD screen
Display scanning status, scanned image and scanner settings.
5
Paper guide tab
Adjust to scan documents of different sizes.
6
Press this button to select JPG (JPEG), PDF-A (PDF-A4) or PDF-L (PDF-Letter) file
format. The icon of the selected mode will be displayed on the LCD screen.
In Setup mode: Press this button to move up the selection bar.
In Playback mode: Press this button to preview the previous image.
When zooming in under Playback mode: press it to move to the upper/left portion of
the image.
7
Press this button to select LO (300dpi), MI (600dpi), HI (1050dpi), or HI (1200dpi
when docked) scan quality. The icon of the selected quality will be displayed on the
LCD screen.
In Setup mode: Press this button to move down the selection bar.
In Playback mode: Press this button to preview the next image.
When zooming in under Playback mode: press it to move to the lower/right portion
of the image.
8
Docking latch
Slide in to secure the scanner, slide out to release the scanner
9
Reset
Press to reset the scanner (Hardware reset)
10
microSD card
slot
The microSD/microSDHC card storage location.
3