User manual


6
Charge time (while scanner is off): Approx. 2.5 hours.
Two charging methods:
1. By connecting to an AC/DC power adapter via the USB interface (Not included).
2. By connecting to a computer via USB cable (supplied).
Note:
Once the battery is fully charged while the scanner is off, battery indicator
will display on LCD screen for a
short time and will turn off automatically.

4.2 Inserting a microSD Memory Card (not included)
To operate the scanner, you must insert a microSD Card (not supplied) to record and store your pictures. To insert
the microSD memory card:
1. Turn OFF the scanner.
2. Insert the microSD card into the microSD card slot (with metal side facing upwards). Gently press in until
the card is clicked in and latched.


4.3 Turn on/off the Scanner
Turn on/off the scanner by pressing and holding.
Note:
If the scanner is turned on for the first time, it will enter Date & Time/Language setup mode. Once the Date &
Time/ Language setting is completed, scanner will enter into standby mode.
By default, Auto-off feature is set to 3 minutes. If the Auto-off feature is set at "3 Min" (refer to section 4.7),
the scanner will automatically turn off if scanning action is not detected within 3 minutes.