User manual


14
Dimensions (L×H×W) mm 10.5”×1.1”×1.5”
Auto power off 3 Minutes
USB port USB 2.0 high speed
External memory microSD/microSDHC card
Standard battery
Built-in 700mAH Lithium-Polymer
Battery charge time
Approx. 2.5 hours
7. Computer System Minimum Requirements

Operating System
Windows® XP, Windows® Vista™, Windows® 7,
Windows® 8, and Mac OS® 10.5 or above (direct plug-in, driver installation not required)
CPU Pentium III or above
RAM At least 256MB
Interface USB port
8.Troubleshooting

Problem Cause Solution
Cannot turn on the
scanner
Low battery power Recharge the battery
Pictures cannot be
saved while you are
scanning them
1. The microSD card has not been
installed
2. Memory is full
3. The microSD card has not been
formatted properly
1. Insert a microSD card
2. Transfer the pictures from the scanner
to the computer to create storage
space in the memory card
3. Please refer to section 4.7
Computer does not
recognize your scanner
when connected(You
cannot find your device
Connection failure
1. Make sure all cable connections
are secured
2. Restart the computer if necessary