User Manual

08
VULTA BLIZZARD
carrier incorrectly can damage the flashlight
and void the warranty.
Important! When charging via the Vulta FA-
CH1 Universal Charger, use only rechargeable
18650 batteries.
To install batteries, follow these steps:
1. Make sure the flashlight is turned off.
2. Unscrew the lamp head from the grip and
remove the battery carrier.
3. Insert three fresh 18650 or six fresh CR123
or RCR123 batteries into the battery carrier.
Make sure the batteries are facing the proper
direction as indicated by the markings on the
carrier.
4. Insert the battery carrier in either direction
into the grip.
5. Screw the lamp head onto the grip until
secure.
OPERATION
The Blizzard FS-E45R employs a
continuously-variable control ring to turn
on the flashlight, control output power, and
engage Strobe mode.