User Manual

09
VULTA TORNADO
When you set the constant-on mode (high/
med/low, see Setting the Mode below)
and then use the side button to enter
standby mode, the next time you power
on the flashlight via the side button, it will
automatically enter the last-set constant-on
mode.
Note: Using the tailcap button to power off the
flashlight will clear the constant-on setting,
and the flashlight will automatically enter
High mode the next time you power it on.
SETTING THE MODE
High/Medium/Low: There are three constant-
on modes: High, Medium, and Low. When
the flashlight is on—either in constant or
temporary mode—press and hold the side
button to cycle through High, Medium, and
Low modes.
Strobe and SOS: Strobe mode continuously
emits quick flashes of bright light. In SOS
mode, the flashlight blinks brightly in the
international Morse code distress signal
pattern (· · · – – – · · ·). To enter Strobe mode,
start with the flashlight powered on and
quickly press the side button twice. To enter
SOS mode, quickly press the side button twice
again.