User Manual

08
VULTA VOLCANO
start with the flashlight either turned off or
in any normal (noncolor) mode. Press and
hold the mode button for approximately two
seconds until Firefly mode activates. To exit
this setting, press the Mode button. To turn
the flashlight off, press the Power button.
SOS: In SOS mode, the flashlight will blink
brightly in the international Morse code
distress signal pattern (· · · – – – · · ·). To enter
SOS mode, start with the flashlight powered
on, and then double-press the Mode button.
To turn the flashlight off, press the Power
button. To enter a constant-output mode,
press the Mode button.
Strobe: Strobe mode continuously emits quick
flashes of bright light. To enter Strobe mode,
quickly double-press the Power button in any
mode, even if the flashlight is turned off. To
turn the flashlight off, press the Power button.
To enter a constant-output mode, press the
Mode button.
COLOR MODES
The FC-B45RBW is equipped with an array
of six red and six blue LEDs along the
circumference of the lamp head. You can set
the flashlight to produce a constant red or
blue light, an alternating red and blue strobe,