VW Series Drawer Warmer Installation & Operation Manual VW1S ML-126500, VW2S ML-126502, VW3S ML-126504, VW4S ML-126506, VW1SB ML-126501, VW2SB ML-126503, VW3SB ML-126505, VW4SB ML-126507, VW1D ML-126508, VW2D ML-126510, VW3D ML-126512, VW4D ML-126514, VW1DB ML-126509, VW2DB ML-126511, VW3DB ML-126513, VW4DB ML-126515, VW1C ML-126516, VW2C ML-126518, VW1CB ML-126517, VW2CB ML-126519

– 9 –
OPERATION
WARNING: THE DRAWER WARMER AND ITS PARTS ARE HOT. BE VERY CAREFUL WHEN
OPERATING, CLEANING OR SERVICING THE DRAWER WARMER.
CONTROLS (Fig. 1)
Fig. 1
OPERATOR INDICATOR LIGHT – Lit when heat is supplied to drawer warmer.
FULL RANGE THERMOSTAT – Acts as the ON/OFF switch to the drawer warmer system.
• Turn to desired temperature setting to turn ON.
• Turn counterclockwise until it stops to turn OFF.
THERMOMETER (not shown) – Indicates interior temperature of drawer warmer.
BEFORE FIRST USE
WARNING: UNPLUG ELECTRICAL POWER SUPPLY BEFORE CLEANING.
1. Clean drawer warmer thoroughly.
a. Use mild soap and water solution to clean drawer warmer.
b. Rinse thoroughly and wipe dry with a soft clean cloth.
c. Clean all accessories.
d. Rinse thoroughly and wipe dry.
2. Operate drawer warmer in highest temperature setting for a period of 30-45 minutes. (See
Operating Drawer Warmer.)
PL-41269-1
OPERATOR INDICATOR LIGHT
FULL RANGE THERMOSTAT