INSTALLATION & OPERATION MANUAL VW SERIES DRAWER WARMERS MODELS VW1S VW2S VW3S VW4S VW1SB VW2SB VW3SB VW4SB VW1D VW2D VW3D VW4D VW1DB VW2DB VW3DB VW4DB VW1C VW2C VW1CB VW2CB VULCAN-HART ML-126500 ML-126502 ML-126504 ML-126506 ML-126501 ML-126503 ML-126505 ML-126507 ML-126508 ML-126510 ML-126512 ML-126514 ML-126509 ML-126511 ML-126513 ML-126515 ML-126516 ML-126518 ML-126517 ML-126519 COMPANY, FORM 31086 Rev. A (12-98) P.O. BOX 696, LOUISVILLE, KY 40201-0696, TEL.
TABLE OF CONTENTS GENERAL............................................................................................................................................. 3 INSTALLATION .................................................................................................................................... 3 Unpacking ................................................................................................................................. 3 Location ............................................
Installation, Operation and Care of MODEL VW SERIES DRAWER WARMERS PLEASE KEEP THIS MANUAL FOR FUTURE USE GENERAL Vulcan-Hart Drawer Warmers are produced with quality workmanship and material. Proper installation, usage, and maintenance of your drawer warmer will result in many years of satisfactory performance. It is suggested that you thoroughly read this entire manual and carefully follow all of the instructions provided.
LOCATION For efficient drawer warmer operation, choose a location that will provide easy loading and unloading without interfering with the final assembly of food orders. The installation location must allow adequate clearances for servicing and proper operation. INSTALLATION CODES AND STANDARDS The drawer warmer must be installed in accordance with: In the United States of America: 1. State and local codes. 2. National Electrical Code, ANSI/NFPA-70 (latest edition).
Electrical Table Model Voltage Phase NEMA Plug VW1S, VW2S, VW3S, VW1SB, VW2SB, VW3SB, VW1D, VW2D, VW3D, VW1DB, VW2DB, VW3DB 110/120 208/240 1 5-15 6-15 VW4S, VW4SB, VW4D, VW4DB 110/120 208/240 1 5-15 6-20 VW1C, VW2C, VW1CB, VW2CB 110/120 208/240 1 5-15 6-15 –5–
–6– VW2D, VW2DB, VW2S, VW2SB VW1D, VW1DB, VW1S, VW1SB WIRING DIAGRAMS
–7– VW4D, VW4DB, VW4S, VW4SB VW3D, VW3DB, VW3S, VW3SB
–8– VW2C, VW2CB VW1C, VW1CB
OPERATION WARNING: THE DRAWER WARMER AND ITS PARTS ARE HOT. BE VERY CAREFUL WHEN OPERATING, CLEANING OR SERVICING THE DRAWER WARMER. CONTROLS (Fig. 1) OPERATOR INDICATOR LIGHT FULL RANGE THERMOSTAT PL-41269-1 Fig. 1 OPERATOR INDICATOR LIGHT – Lit when heat is supplied to drawer warmer. FULL RANGE THERMOSTAT – Acts as the ON/OFF switch to the drawer warmer system. • Turn to desired temperature setting to turn ON. • Turn counterclockwise until it stops to turn OFF.
OPERATING DRAWER WARMER 1. Connect electric power supply. 2. Turn thermostat knob to desired setting. • Heating elements begin heating. • Operator indicator light is lit. 3. Thermometer will indicate the interior temperature of the drawer warmer. 4. Once desired temperature is reached, heating elements will cycle on and off. • Operator light will cycle on and off with the heating elements. • Temperature in drawer warmer may fluctuate as the heating elements cycle on and off. 5.
CLEANING WARNING: UNPLUG ELECTRICAL POWER SUPPLY BEFORE CLEANING. Clean drawer warmer interior with a mild soap and water whenever food spill occurs. Never use harsh chemicals or abrasive pads to clean drawer warmer. Daily 1. Allow drawer warmer to cool before cleaning. 2. Clean drawers and the interior of the drawer warmer with a mild soap and water. 3. Rinse and dry with a soft dry cloth. 4. Clean exterior of drawer warmer with a clean damp cloth.
NOTES FORM 31086 Rev. A (12-98) – 12 – PRINTED IN U.S.A.