Specifications

– 22 –
VG30, VG40, VE30 & VE40 BRAISING PANS
MAINTENANCE
Disconnect the electrical power to the machine and follow
Lockout / Tagout procedures before performing any maintenance.
The tilting braising pan and its parts are hot. Use care when operating, cleaning
or servicing the braising pan.
LUBRICATION
Lid Mechanism
1. The lid lift mechanism and tension spring are located behind the backsplash (sheet metal panel
behind the braising pan) on both the left and right rear corners of the braising pan.
2. Take the cover off by prying and lifting up (Fig. 7).
3. For smooth operation of the lid, lubricate these mechanisms with 8 to 10 drops of lubricating
machine oil every 6 months. Place a few drops of oil between the lid arm and stationary block,
and a few drops on the shaft around which the spring is coiled.
4. Replace the cover to maintain smooth operation.
Fig. 7
ADJUSTMENTS
At least twice a year, have a Vulcan-Hart authorized service person clean and adjust the tilting braising
pan for maximum performance.
FLUE
When cool, annually check the flue. Clean the flue of any grease buildup or other obstructions that can
affect the flow of the flue gases from the braising pan.
PL-41754-1
LUBRICATE
COVER