Service manual

ELECTRIC CONVEYOR OVENS - REMOVAL AND REPLACEMENT OF PARTS
Pa
g
e 9 of 24
CONVEYOR DRIVE MOTOR
WARNING:
UNPLUG UNIT BEFORE SERVICING.
1. Perform steps 1 thru 3 in “CONVEYOR DRIVE
CHAINS”.
2. Note location of sprocket on motor shaft and
remove sprocket.
3. Remove socket head screws securin
g
motor
and remove motor.
4. Install in reverse order and adjust chain tension
as outlined in “DRIVE CHAIN TENSION”.
CONVEYOR DRIVE CHAINS
WARNING:
UNPLUG UNIT BEFORE SERVICING.
1. Remove the motor housin
g
as outlined under
“COVERS AND PANELS”.
2. Remove motor drive chain by loosenin
g
nut on
lar
g
e driven
g
ear shaft. Raise
g
ear and remove
chain.
3. Install in reverse order and adjust chain tension
as outlined in “DRIVE CHAIN TENSION”.