Service manual

ELECTRIC CONVEYOR OVENS - GENERAL
Pa
g
e 3 of 24
GENERAL
GENERAL
Procedures in this manual will apply to all models
unless specified. Pictures and illustrations can be of
any model unless the picture or illustration needs to
be model specific.
INSTALLATION
Generally, installations are made by the dealer or
others contracted by the dealer or owner.
Detailed installation instructions are included in the
"Instructions" manual which is sent with each unit.
OPERATION
Detailed operation instructions are included with
each oven.
LUBRICATION
No lubrication is required.
CLEANING PROCEDURES
Detailed cleanin
g
procedures are included in the
"Instructions" manual for the appropriate model.
TOOLS
Standard
Standard set of hand tools.
VOM with A.C. current tester
(Any quality VOM with a sensitivity of at least
20,000 ohms per volt can be used).
Special
Temperature tester (thermocouple type).
SPECIFICATIONS
MODEL
TOTAL
KW
NOMINAL AMPS PER LINE WIRE
3 Phase 1 Phase
208V 240V 480V 208V 240V
3018
10 28 24 12 48 42
15 42 36 18 72 63
4018 15 42 36 18 72 63
3624 30 83 72 36 144 125
3632 30 83 72 36 144 125