Service manual

ELECTRIC CONVEYOR OVENS - REMOVAL AND REPLACEMENT OF PARTS
Pa
g
e 10 of 24
HEAT ELEMENTS
WARNING:
UNPLUG UNIT BEFORE SERVICING.
1. Remove the control housin
g
as outlined under
“COVERS AND PANELS”.
Models 3018 and 4018
1. Remove two screws securin
g
component
mountin
g
assembly.
2. Swin
g
out component mount assembly.
3. Remove insulation and cover. Carefully work
element wires out of the cutout in cover.
4. Identify and remove power leads from
elements.
5. Remove screws securin
g
heater assembly.
6. Carefully pull heater assembly out of chamber.
7. Replace elements.