Food Warmer User Manual

V SERIES FOOD HOLDING, TRANSPORT, & BANQUET CARTS F-41140 (09-09)
5
receptacle is not the proper
grounding type, contact an
electrician. DO NOT REMOVE THE
GROUNDING PRONG FROM THIS
PLUG.
CAUTION: Verify that the power
source matches the Serial Data Plate
located on the lower back corner of
the cabinet and the plug
configuration before the connection
is made. (Fig.2)
(Fig. 2)
It is recommended that prior to placing the cabinet in operation that it be
PLEASE NOTE:
preheated at the highest temperature setting for a period of 30 to 45 minutes.
OPERATION
CONTROLS
Models: VB90, VB96, VB150, VBP5I,
VBP7I, VBP13I, VBP15I, VBP33,
VBP77I, VBS15, VHDP5, VHP3, VHP7,
VHP8, VHP15, VHP20
POWER FULL-RANGE
INDICATOR LIGHT THERMOSTAT
THERMOMETER HEAT INDICATOR LIGHT
(Fig. 3)
Power Indicator Light:
The Red Power Indicator Light indicates
power is supplied to the cabinet. The
red light will stay lit as long as the
cabinet is plugged in.
Heat Indicator Light:
The Amber Heat Indicator Light
indicates the heating element(s) are
heating. The amber light will stay lit as
long as the heating element(s) are
engaged. Once the predetermined
temperature is achieved, the heating
element(s) will begin to cycle. During
this period, the amber light will turn on
and off.
Thermometer:
The Thermometer indicates the interior
temperature of the cabinet.
Thermostat:
The Thermostat turns power on to the
heating element(s). The thermostat
setting is from 1 to 10. The greater the
thermostat setting number, the higher
the temperature. (Fig. 4)