Service manual

– 7 –
CONTROL PANEL COMPONENTS
WARNING: DISCONNECT (UNPLUG) ELECTRICAL
POWER SUPPLY AND PLACE A TAG AT THE
DISCONNECT SWITCH INDICATING YOU ARE
WORKING ON THE CIRCUIT.
Indicator Light
1. Remove the cooker control panel as outlined
under Covers and Panels.
2. From the rear of the control panel, unscrew
the wire cap of the light to be replaced.
3. Press the tabs on both sides of the indicator
light being replaced and pull the light out
through the front of the panel.
4. Reverse the procedure to install indicator
light.
Rocker Switches
1. Remove the cooker control panel as outlined
under Covers and Panels.
2. Remove the wire leads from the rocker switch
terminals.
3. Press the tabs on both sides of the switch
and push it through the front of the control
panel. Retain the switch backup plate for
reassembly.
4. Reverse the procedure to install new rocker
switch.
Optional Basket Lift Timer
1. Remove the cooker control panel as outlined
under Covers and Panels.
2. Remove all the wiring associated with the
timer.
3. With an
1
/8" Allen wrench, loosen the setscrew
and remove the knob.
4. Remove the timer mounting hardware and
remove the timer.
5. Reverse the procedure to install new timer.