Service manual

– 6 –
3. Disconnect the water hoses and remove the
panel from the rinse station.
4. Reverse the procedure to install.
Upper and Lower Lift Mechanism Panels
WARNING: SHUT OFF THE GAS BEFORE
SERVICING.
WARNING: ALL GAS JOINTS DISTURBED DURING
SERVICING MUST BE CHECKED FOR LEAKS.
CHECK WITH SOAP AND WATER SOLUTION
(BUBBLES). DO NOT USE AN OPEN FLAME.
1. Remove basket lift arm.
2. Disconnect tipping restraint. Disconnect gas
supply union at the rear of the pasta cooker.
3. Remove hex head screws from the upper
panel.
4. Remove the head screws from the lower
panel.
5. Lift back up and over the lift mechanism.
6. Remove panel.
7. Reverse the procedure to reinstall panels.