Service manual

– 5 –
REMOVAL AND REPLACEMENT OF PARTS
COVERS AND PANELS
WARNING: DISCONNECT (UNPLUG) ELECTRICAL
POWER SUPPLY AND PLACE A TAG AT THE
DISCONNECT SWITCH INDICATING YOU ARE
WORKING ON THE CIRCUIT.
Cooker Control Panel
1. The control panel is secured with four hex
head screws, two on each side of the panel
and two under the flange. Remove these
screws.
2. Fold down the control panel.
3. Disconnect the main wire harness (two places)
and carefully remove the panel from the fryer.
4. Reverse the procedure to install.
Rinse Station Control Panel
WARNING: SHUT OFF WATER BEFORE
SERVICING.
1. The control panel is secured with four hex
head screws, two on each side of the panel
and two under the flange. Remove these
screws.
2. Lift the panel off.