Service manual

– 22 –
7. Remove the center strip between the cooker
and rinse tank.
8. Disconnect the center rubber drain hose.
9. Disconnect the water fill hose fittings from
the rear of the of the pasta cooker.
10. With the assistance of another person, stand
in front of the pasta cooker and grasp the
back and the front of the tank. Carefully tilt
the tank back forward and lift the tank out of
the pasta cooker body (see step 18 under
Cooker Tank).
11. Remove the rinse station faucet assembly.
12. Reverse procedure to install. Retain the
controls and hardware for reassembly to the
new tank.