Service manual

– 15 –
OVERFLOW HOSES
WARNING: DISCONNECT (UNPLUG) ELECTRICAL
POWER SUPPLY AND PLACE A TAG AT THE
DISCONNECT SWITCH INDICATING YOU ARE
WORKING ON THE CIRCUIT.
Cooker Tank Hose
1. Drain all the water from the cooker tank.
2. Remove the cooker control panel as outlined
under Covers and Panels.
3. Remove the control box housing as outlined
under Control Box Housing.
4. Remove the hose clamps on the top of the
hose.
5. Remove the hose clamps on the bottom of
the hose.
6. Pull the hose from the top drain tube and the
and the bottom T-fitting.
7. Reverse the procedure to install new overflow
hose.
Rinse Tank Hose
1. Drain all the water from the rinse tank.
2. Remove the rinse tank control panel as
outlined under Covers and Panels.
3. Remove the hose clamps on the top of the
hose.
4. Remove the hose clamps on the bottom of
the hose.
5. Pull the hose from the top drain tube and the
and the bottom elbow fitting.
6. Reverse the procedure to install new overflow
hose.