Service manual

– 11 –
5. Remove the two holding hex head screws
securing the mounting bracket to the high
limit.
6. Follow the high limit capillary to the packing
nut located on the bottom of the cooker tank.
7. Access to the packing nut can be gained
through the rinse station door on the right
side of the pasta cooker. Remove the packing
nut then remove the high limit mounting nut.
NOTE: If more room is required to reach the packing
nut the right burner may be removed. See Gas
Burners for removal.
HIGH LIMIT
WARNING: DISCONNECT (UNPLUG) ELECTRICAL
POWER SUPPLY AND PLACE A TAG AT THE
DISCONNECT SWITCH INDICATING YOU ARE
WORKING ON THE CIRCUIT.
1. Drain all the water from the cooker tank.
2. Remove the left burner for direct access to
the high limit. See Gas Burners for removal.
3. Remove the electrical wiring from the high
limit.
4. Remove the two nuts and bolts securing the
high limit mounting bracket to the frame.