Specifications

– 9 –
GH30 GH60T45 GHM72/45S GHX60T
GH45 GH60/72 GHM45/72S GHXM60S
GH60 GH60T72 GHM60/45S GHXM60TS
GH60T GH3/72 GHM60T45S GHX72
GH72 GHM30S GHM60/72S GHXM72S
GH72/45 GHM60S GHM60T72S GHX45
GH45/72 GHM60TS GH6
GH60/72 GHM72S GHX60
Snorkel
®
Ranges must not be included in back-to-back setups.
The following ranges are to be installed only on non-combustible floors:
GHM72 GHXM72 GH45/72 GHM60/45 GHM72/45
GHM45 GHXM45 GHM45/72 GHM3/72 GHM6
GHM30 GHXM60 GHM60/72
The installation location must allow adequate clearances for servicing and proper operation. A
minimum front clearance of 35" (88 cm) is required.
The range(s) must be installed so that the flow of combustion and ventilation air will not be obstructed.
Adequate clearance for air openings into the combustion chamber(s) must be provided. Make sure
there is an adequate supply of air in the room to allow for combustion of the gas at the burners.
INSTALLATION CODES AND STANDARDS
Your Vulcan range(s) must be installed in accordance with:
In the United States:
1. State and local codes.
2. National Fuel Gas Code, ANSI/Z223.1 (latest edition), available from American Gas Association,
Inc., 1515 Wilson Blvd., Arlington, VA 22209.
3. National Electrical Code ANSI/NFPA-70 (latest edition). Copies available from The National Fire
Protection Association, Batterymarch Park, Quincy, MA 02269.
In Canada:
1. Local codes.
2. CAN/CGA-B149.1 Natural Gas Installation Code (latest edition).
3. CAN/CGA-B149.2 Propane Installation Code (latest edition), available from The Canadian Gas
Association, 178 Rexdale Blvd., Etobicoke, Ontario, Canada M9W 1R3.
4. Canadian Electrical Code, CSA C22.2 No. 3 (latest edition). Copies may be obtained from The
Canadian Standard Association, 178 Rexdale Blvd., Etobicoke, Ontario, Canada M9W 1R3.