Specifications

OPERATION
480 VOLT
SUPPLEMENT
WARNING: THE RANGE AND IT’S PARTS ARE HOT. BE VERY CAREFUL WHEN OPERATING, CLEANING
OR SERVICING THE RANGE.
CONTROLS (Fig. 6A & 6B) 480 volt
MODEL E36L SHOWN 6A
1 2 3 4 4
MODEL E36X SHOWN 6B
5 6 5 6
1. OVEN INDICATOR LIGHT – Will be lit until the selected temperature is reached or when temp. is
being maintained.
2. PANEL PLUG – Fills hole in panel where oven Infinite switch would mount on 208 & 240 volt units.
480 Volt ranges do not have an oven top element infinite control.
3. OVEN THERMOSTAT – Regulates the amount of heat needed to control and maintain oven
temperature at the selected set temperature. Selectable temperature range is 150°F. to 550°F. (65°C. to
288°C.) Turn dial clockwise to increase temperature and counterclockwise to decrease temperature.
4. FRENCH PLATE 3 HEAT SWITCH – Each switch controls a 2000 Watt top surface (round) unit.
Positions OFF = No power. HIGH = Full power 2000 W. MED = ½ power 1000 W. LO = ¼ power
500 W. Select as desired to maintain surface unit heat level.
5. SURFACE INDICATOR LIGHT - Will be lit until the selected surface temperature is reached or when
temp. is being maintained.
6. GRIDDLE SURFACE THERMOSTAT – Regulates the amount of heat needed to control and
maintain griddle temperature at the selected set temperature. Selectable temperature range is 150°F. to
550°F. (65°C. to 288°C.) Turn dial clockwise to increase temperature and counterclockwise to
decrease temperature.
7. SURFACE THERMOSTAT – (NOT SHOWN) Regulates the amount of heat needed to control and
maintain hot top temperature at the selected set temperature. Select temperature by setting “1 to 10”
dial for minimum (1) to maximum (10) temperature. (1 ≈ 350°F. 10≈ 750°F.) Turn dial clockwise to
increase temperature and counterclockwise to decrease temperature. Also uses item 5 above.
F30968-S REV B (04-08)
9 A