Hardware manual

8 ASA-72 Hardware Manual

2.4.1 Mounting

Enclosure Mounting

The ASA-72 enclosure is a steel cabinet which is designed for mounting on a wall. Four mounting

holes are provided in the enclosure. See Figure 54 for mounting hole locations.

Power Supply Mounting

Mount the power supply in the cabinet using the #6 hardware provided, as shown in Figure 54.

Fasten the supply to the cabinet mounting studs using hex nuts, split lock washers and flat

washers.

Connect the green Ground wire to the dedicated ground stud (GND), using a #6 hex nut with an

internal star washer between the terminal lug and the cabinet wall.