Specifications

— 8 —
Installation of Thermostat Bulb and Capillary
The thermostat bulb and capillary are located underneath the griddle plate.
1. Uncoil a few turns (only enough to reach into the V-baffle) of the bulb and capillary assembly
for each griddle thermostat (Fig. 5).
Fig. 5
2. Carefully feed the bulb into the V-baffle in each section of the griddle. There will be (1)
capillary bulb for each griddle thermostat. Make sure that the bulb is fully inserted into the
V-baffle so there is no exposure of the capillary to the burner flame (Fig. 6).
Fig. 6 Fig. 7
3. After all bricks and capillary bulbs are installed, carefully align and lower griddle assembly down
so that it is resting evenly on the unit. Check to insure that all excess capillary is resting below the
brick baffle area (Fig. 7).
Clean and Season the griddle top before placing the unit into operation.