Specifications

— 7 —
Installation of Standard Griddle Top Bricks
The griddle is shipped mounted on the range when it is received by the customer. However, the
thermostat bulb, capillary and griddle bricks must be installed before operating the griddle.
The bricks are shipped in a rectangular box with the range.
1. Locate the bricks and gently unpack them (bricks are fragile and brake easily). There will be (4)
bricks per griddle baffle section, (2) 10" x 4" (254 x 102 mm) and (2) 7" x 4" (178 x 102 mm) bricks.
NOTE: If a brick has been broken into two pieces, it can still be used. Just place the pieces into
position as shown in Fig. 4. However, if a brick is broken into more than two pieces, it will need to
be replaced. Contact your local Vulcan servicer.
Fig. 4
2. Lift up and secure the griddle plate assembly.
3. Install (2) 10" x 4" (254 x 102 mm) bricks to the front of each baffle section, with the mitered edge
facing up. Install (2) 7" x 4" (178 x 102 mm) bricks to the rear of each baffle section (Fig. 4).