Specifications

— 19 —
CONVECTION (SNORKEL
®
) OVEN (90 SERIES ONLY)
Light open top/griddle pilots before lighting oven pilot.
1. Open the kick panel and lift up the pilot lighting hole cover (see Fig. 18).
2. Turn red gas valve ON (located behind the kick panel), purging the gas line of all air (Fig. 21). Turn
gas valve and power switch OFF. Close oven door.
3. Light oven pilot by depressing the reset button (Fig. 22) and, using a taper, ignite the pilot. Hold reset
button in for 30 seconds or until pilot remains lit. Turn gas valve ON.
4. If pilot fails to light, turn main gas supply OFF. Wait 5 minutes and repeat Steps 2 and 3.
5. After pilot is lit, push the power switch ON and turn the thermostat to the desired setting.
Nightly Shutdown
Turn the power switch OFF and the thermostat to 0 degrees.
Complete Shutdown
1. Push power switch OFF.
2. Turn red gas valve OFF (behind kick panel).
3. Turn main gas supply OFF.
4. Disconnect electrical supply cord.
Fig. 21 Fig. 22