Specifications

— 18 —
STANDARD OVEN
Light open top/griddle pilots before lighting oven pilot.
1. Open kick panel and lift up the pilot lighting hole cover (Fig. 18).
2. Light pilot by depressing the reset button located behind the kick panel (Fig. 19). Continue to hold
reset button in for 1 minute. If pilot fails to light, turn main gas supply OFF and wait 5 minutes before
repeating Step 2.
3. After pilot is lit, turn the thermostat to the desired setting.
Nightly Shutdown
Turn oven thermostat OFF.
Complete Shutdown
1. Turn oven thermostat OFF.
2. Turn main gas supply OFF.
STANDARD OVEN WITH SPARK IGNITION (FIG. 20)
1. Move toggle switch to ON position. Oven On Light
will illuminate. The oven pilot will automatically light.
2. Once the oven pilot is established, the oven READY
light will illuminate.
3. Set oven thermostat to desired temperature.
Nightly Shutdown
Push toggle switch to OFF position.
Complete Shutdown
1. Push toggle switch to OFF position.
2. Turn main gas supply OFF.
Fig. 18 Fig. 19
OVEN "READY"
LIGHT
OVEN "ON"
LIGHT
THERMOSTAT
TOGGLE
SWITCH
PL-53531
Fig. 20