Specifications

Oxygen Flow Meter with Humidifier:
• Direct fitted to the Outlet (British Standard), included with the Humidifier.
• Nickel-plated brass base and body
• Clear shroud
• Expanded lower scale 0-5Lpm
Sphygmomanometer, Wall Mounted:
• Wall mounted or rail fitted as hospital requirements
• 6 in. to 8 in. diameter anemometer
• 7ft extendable neoprene tubing
• Easily read scale
• Pair of cuff for adult and child
• Cuff able to fits neatly at instrument grilled basket
ANNEX 2—SPECIFICATIONS
IN-PATIENT UNIT
Patient Bed, Electric:
• Integrated collapsible side rail w/ control and Foot Board control with lock out
• Electrical Controlled Movement: Bed up/down: 74cm/36cm
Backrest: 0 - 65 Deg
Knee Gatch: 0 - 24 Deg
Trend/Rev. Trend: +/- 14Deg
• Weight Capacity: 500lbs (228kgs)
• Supplied with Bedside cabinet and Table Top Server
• Power requirements: 220 volts, 60 HZ
• Lowest Height of 13.5 inch (34.30 cm), enhances patient safety
• Mobile on four double castors to be activated by foot pedal.
• Complete w/ IV receptacle and IV pole
Vital Signs Monitor with Trolley:
• Parameters include ECG, NIBP, Sp02, Pulse rate and Temperature
• Large LED Display easily able to seen 3 meter distance
• Color Coding clearly presents parameters data second by second
• Built in Printer
• Internal rechargeable battery operating life Minimum two hour
• Technique Automatic Oscillometric
• Range 0-255 mmHg Accuracy +/- 2 mmHg
• Cuff inflation 3 to 20 seconds
• With Alarm for Systolic and Diastolic
• Pulse Oximeter Range 0-90 %, Resolution 1 %
• Accuracy +/- 2%
• Heart rate Range 0-250 bpm, Resolution 1 bpm, Accuracy +/-1 bpm.
• Power Supply 220 Volt 60 Hz
Infusion Pump:
• The volumetric infusion pump for routine tasks and intensive care medicine for
use in all wards
• Microprocessor controlled
• Leakage current should be less than 10 micro ampere