Download

11
STEP 2
3. Drill pilot holes.
IMPORTANT: Pilot holes must be drilled to a depth of 75 mm (3 in.), using a 5.5 mm (7/32 in.) diameter drill bit.
4. Tighten the lag bolts
14
only until the washers
15
are pulled firmly against the wall plate
13
.
CAUTION: Improper use could reduce the holding power of the lag bolt. DO NOT over-tighten the lag bolts.
3 4
12 13
75 mm
(3 in.)
5.5 mm
(7/32 in.)
14
15