User Manual

VTS2000 Series frequency inverter
- 74 -
tion timeout
detection
time
signal within the time interval defined by this
function code, then the machine considers that the
communication has failed, and the inverter will
decide whether to protect or maintain the current
operation according to the setting of the
communication failure action mode. When the value
is set to 0.0, RS485 communication timeout
detection is not performed.
F6.03
Local
response
delay
This function code defines the end of the inverter
data frame reception and sends the intermediate time
interval of the response data frame to the host
computer. If the response time is less than the
system processing time, the system processing time
shall prevail.
0
～
200ms
5ms
×
F6.04
Proportiona
l linkage
coefficient
This function code is used to set the weight
coefficient of the frequency command received by
the inverter through the RS485 interface which as
0.01
～
10.00
1.00
○