User Manual

VTS2000 Series frequency inverter
- 8 -
setting
Pulse output terminal
0~50kHz pulse square wave signal output, can realize the output of
physical quantities such as set frequency and output frequency
Analog output
terminal
2 analog signal outputs. The output range is flexibly set between 0~20mA
or 0~1OV, which can realize the output of physical quantities such as set
frequency and output frequency
operating
panel
LED display
Can display 26 parameters such as set frequency, output frequency, output
voltage, output current, etc.
Key function
selection
Define the action range of some keys to prevent misoperation
Protective function
Phase loss protection (optional), over-current protection, over-voltage
protection, under-voltage protection, over-temperature protection.
Overload protection, load loss protection, etc.
Environment
Location
Indoor. Free from direct sunlight, dust, corrosive gas, flammable gas, oil
mist, water vapor, dripping or salt etc.
Altitude
Use derating above 1000 meters, derate 10% for every 1000 meters raised