Specifications

OPERATING INSTRUCTIONS
RAMP 1 provides for the smoothest
launch and most gradual acceleration.
RAMP1alsoprovidesfortheslowest
TARGET SPEED range.
RAMP 5 provides for the quickest
launch and most rapid acceleration.
RAMP 5 also provides the highestTAR-
GET SPEED range.
The RAMP setting that is selected by
default when entering ski mode may
be changed to a different setting.
TARGET SPEED Function
The TARGET SPEED functionlimits the
maximum towing speed.
Once the RAMP has been selected,
an average PWC target speed for that
RAMP will be visible in the numerical
display.
The average speed displayed and the
speed range available is dependent on
the RAMP selected. The higher the
RAMP number, the higher the speed
range.
The operator may increase or decrease
thetargetspeedtoanyvaluewithinthe
selected RAMP speed range.
If the desired target speed cannot be
set in the selected RAMP, you must
exit then reengage SKI MODE, and se-
lect a different RAMP.
Engaging and Using Ski Mode
To engage ski mode, carry out the fol-
lowing steps:
1. Press the MODE button repeatedly
until SKI MODE is visible in the mul-
tifunction display.
sdd2009-001-024_e
1. MODE button
smo2010-002-116
SELECTED FUNCTION - SKI MODE
2. Press SET to enter the function.
The multifunction gauge will display
RAMP. The RAMP number will be
visible in the numerical display.
sdd2009-001-024_f
1. SET button
_______________
97