Specifications

OPERATING INSTRUCTIONS
speed zones where the driver must be
especially attentive to possible obsta-
cle avoidance.
The operator can set idle speed
between 1.6 km/h to 8 km/h
(1 MPH to 5MPH).
To engage SLOW SPEED MODE:
– Release the throttle lever to idle
RPM.
– Pull in and release the iBR lever to
engage neutral.
– Press and hold the cruise button for
approximately 1 second.
Slow Speed Mode allows normal
acceleration up to a speed close of
32 km/h (20 MPH) without deactivat-
ingit. Ifyouaccelerateabovethat
speed, Slow Speed Mode will be de-
activated and the engine will return to
idle RPM when the throttle is released.
Should a situation arise where the op-
erator must stop or accelerate quickly
away from a hazardous situation,
pulling in the iBR lever, or pulling in on
the throttle lever will deactivate slow
speed mode and normal control of the
watercraft will be returned to the oper-
ator.
Activating Slow Speed Mode
To activate slow speed mode of opera-
tion:
1. Release the throttle lever to idle
RPM.
2. Pull in and release the iBR lever to
engage neutral.
3. Press and hold the cruise button for
approximately 1 second.
sdd2009-001-024_g
TYPICAL
1. CRUISE button
The green CRUISE indicator light will
come on in the speedometer display to
indicate cruise activation.
sdd2009-001-034_a
CRUISE MODE ON INDICATOR LIGHT
A message will scroll in the digital
screen to specify that you are now
in slow speed mode. The default slow
speed setting of 1 will also come on for
a few seconds in the digital screen.
_______________
95