Specifications

OPERATING INSTRUCTIONS
Take into account that the hull will be
lower in the water when all passen-
gers are aboard. Be certain to maintain
the specified depth so sand, pebbles
and rocks will not be drawn up in the
jet pump.
A
F18L0XY
A. Maintain at least 90 cm (3 ft) underneath
the lowest rear portion of the hull when all
passengers are aboard
NOTICE
– Starting the engine or riding the
watercraft in shallower water
may damage the impeller or other
jet pump components.
– Stay on center of the step.
– Only one person at a time on the
step.
Boarding in Deep Water
WARNING
– Be aware of the iBR gate move-
ment when starting the engine,
shutting down the engine or us-
ing the iBR lever. Automatic
movement of the gate may
squeeze fingers or toes of peo-
ple taking a hold on the back or
your PWC.
– Keep limbs away from jet or in-
take grate.
– Never use jet pump compo-
nents, pump guard, or iBR gate
as a supporting point to board
the watercraft.
– Inexperienced riders should
practice how to board the water-
craft close to shore (all methods
explained here) before ventur-
ing into deep water.
Operator Alone
Swim to the rear of the watercraft.
Using one hand, lower the boarding
step.
smo2009-002-140
Using the other hand, take hold of one
of the boarding platform grab handles,
then pull yourself up so that you can
knee onto the boarding step.
_______________
85