Specifications

EQUIPMENT
smo2010-002-007_a
RETAINING BRACKETS FOR WAKEBOARD
RACK
1. Lower retaining bracket
2. Upper retaining bracket
smo2010-002-009_a
1. Hooked portion of rack in lower bracket
2. Rotate the rack upwards and push
the top of the rack inboard until the
handle locks into the top retaining
bracket.
WARNING
If rack is not properly secured on
the watercraft, it could become
loose and detach unexpectedly,
creating a risk of injury to people
nearby. Periodically ensure the
rack is properly locked on its sup-
port.
3. When installing a wakeboard on
the rack, position wakeboard fin(s)
outward with the heel of the boots
facing down near freeboard of the
PWC.
4. Secure wakeboard using bungee
cords.
WARNING
To avoid possible injuries and cuts
from the wakeboards fin(s), al-
ways place FIN(S) OUTWARDS.
smo2010-002-008
WAKEBOARD INSTALLED WITH FINS
OUTWARD
5. After installation, pull and push
wakeboard to ensure it is tightly
secured to rack.
WARNING
If thewakeboard is notproperly se-
curedontherack,itcouldbecome
loose and detach unexpectedly,
creating a risk of injury to people
nearby. To avoid:
– Inspect bungee cords condition
and replace if damaged.
– Secure wakeboard properly on
rack.
– Periodically ensure the board is
properly attached.
NOTE: When the wakeboard is re-
moved from its rack, secure the
bungee cords so that they will not
move freely when riding watercraft.
NOTICE
The rack is designed to
hold one wakeboard. Do not use to
hold more than one wakeboard or
to transport skis or any other object.
Do not use rack(s) as mooring points
or to reboard.
82
______________