Specifications

EQUIPMENT
smo2009-002-134_a
1. Front speed-tie
smo2009-002-131_d
1. Rear speed-tie
WARNING
– Do not use retractable ropes
when watercraft engine is run-
ning.
– Do not use to tow a watercraft.
Do not use to pull a person or
any object behind or to the side
of the watercraft.
– Do not use speed-tie rope as a
tie-down on a trailer.
NOTICE
– This system is designed for tem-
porary use in normal conditions.
Do not use as a permanent moor-
ing system, or in extreme condi-
tions (strong winds, waves, etc.).
– Regularly inspect rope condition;
do not tie up watercraft with a
damaged rope. Replacing BRP
rope by any other rope will void
the speed-tie warranty.
– If speed ties are used in salt wa-
ter conditions, the rope should
be regularly rinsed thoroughly
with fresh water to prevent salt
buildup in the rope and speed-tie
mechanism. This will help extend
the life of the rope and ensure
proper operation the mechanism.
NOTE: The rope of the speed-tie is a
wear item that is not covered under
normal warranty.
Refer to
MAINTENANCE section for
speed-tie cleaning instructions.
Mooring your PWC Using the
Speed-Ties
1. With your watercraft parallel to the
dock and at a standstill next to the
dock mooring cleat, release the
front speed-tie by lifting the lever.
2. Grasp and pull on the mooring line
stopper to extract enough line to
reach and tie off to the mooring
cleat.
78
______________