Specifications

EQUIPMENT
4) Fire Extinguisher
Holder
RXT-iS, GTX iS and GTX Limited iS
Use the support inside the RH storage
bin under the rear boarding platform,
and secure the extinguisher using the
rubber tie-down.
Refer to
REAR STORAGE BINS for il-
lustration.
NOTE: Fire extinguisher is sold sepa-
rately.
Other Models
The fire extinguisher support is located
in the front storage bin.
5) Seat Latch
The seat latch is located at the back
end of the seat. The forward end of
the seat is mounted on a hinge.
To open the seat, pull up on the latch
handle and lift the seat fully open. A
cylinderatthefrontoftheseatserves
to hold the seat in the fully open posi-
tion.
smo2009-002-129_a
TYPICAL - SEAT LATCH
1. Seat latch handle
2. Latch pin
3. Pin insertion hole
To latch seat, close the seat and firmly
push down on the rear portion of the
seat.
CAUTION Ensure the latch is
properly locked onto the pin.
6) Passenger Handholds
The seat strap provides a handhold for
a passenger to hold on to when riding.
The sides of the molded grab handle at
the rear of the seat also provide a hand-
hold for a passenger. The rear portion
of the molded grab handle provides a
handhold for the skier/wakeboarder
spotter or for boarding the watercraft
from the water.
NOTICE
Never use the molded
grab handle to tow anything or to lift
the watercraft.
smo2009-002-130_a
TYPICAL - PASSENGER HANDHOLDS
1. Seat strap
2. Molded grab handle
7) Boarding Step
A convenient step used for boarding
the watercraft from the water.
smo2009-002-132_a
TYPICAL
1. Boarding step
76
______________